Home / AI estimates / Whole house surge protector
Write a whole house surge protector estimate with AI
A whole house surge protector estimate lists the device, a breaker, a permit, and about two hours at the panel, and it usually comes to about $475. VanReceipts writes it from a sentence.
Free to look around. 3 days free on yearly Pro.
Does the panel have two spare spaces?
Whole house surge protector
SAMPLE PRICES| # | Line | Type | Qty | Rate | Amount | Note |
|---|---|---|---|---|---|---|
| 1 | Type 2 surge protector | Material | 1 | $189 | $189 | Panel-mounted SPD |
| 2 | Two-pole breaker | Material | 1 | $28 | $28 | Matches the panel brand |
| 3 | Connector and nipple | Material | 1 | $14 | $14 | Short nipple at the panel |
The total and 4 more lines are in the app.
Get the appWhat this job usually bills at
$70 to $700
Customers typically pay this range, from the sources below, so you can sanity check your total.
Sample prices, not a quote. Customers typically pay $70 to $700 to install a whole-house surge protector, average $300. Another guide puts the device itself at $70 to $700, average about $300, and that band does not include installation. The $475 sample is a mid device plus labor and a permit. It sits inside the installed $70 to $700 band. It is not a device-only price, which is why it sits above the low end of a parts-only reading of that same band.
The typical cost to install a whole-house surge protector ranges from $70 to $700, with the national average cost at $300.
Accessed 2026-10-12.The answer is anywhere from $70 to $700, not including installation. The cost to purchase a whole-house surge protector ranges from $70 to $700, with the national average being around $300, according to Sanders.
Accessed 2026-10-12.What the estimate assumes
- The main panel has two spare spaces for the breaker.
- This is a Type 2 device at the panel, not a plug-in strip.
- The service does not need an upgrade to land the protector.
- Labor is about two hours with the power off.
Frequently asked questions.
How do electricians price a whole house surge protector?
Price the SPD, the breaker, the short connector, the permit, and the time with the panel dead. Published install figures run about $70 to $700, average $300, and the device alone is often quoted in that same band before labor. This sample is $475 installed.
What should a surge protector estimate include?
The device type, whether the panel has space, and the permit. This sample is a Type 2 unit on a panel that already has two spaces. A panel change is a different estimate.
How long does a surge protector install take?
The sample uses an hour and a half to land it and a short stop to update the directory. A full panel, or a meter-main that the utility has to pull, takes longer.
Should the breaker be its own line?
Yes. The breaker has to match the panel, and some devices ship without one. This sample shows $28 so the customer can see it.
Are these prices a real quote?
No. The lines are sample prices so you can see the shape of the estimate. In the app, the estimate follows the job you describe, your answer, and your prices.
