Home / AI estimates / Repipe with PEX
Write a PEX repipe estimate with AI
A PEX repipe estimate lists the tubing, manifolds, stops, the permit, crew labor, and a drywall allowance, and a two-bath house usually comes to about $7,500. VanReceipts writes it from a sentence.
Free to look around. 3 days free on yearly Pro.
Can you reach the runs without opening finished floors?
Repipe with PEX
SAMPLE PRICES| # | Line | Type | Qty | Rate | Amount | Note |
|---|---|---|---|---|---|---|
| 1 | PEX tubing | Material | 400 ft | $2 | $600 | Hot and cold home runs |
| 2 | Manifolds and fittings | Material | 1 lot | $480 | $480 | Two manifolds in the basement |
| 3 | Stops and shutoffs | Material | 12 | $18 | $216 | One stop per fixture |
The total and 5 more lines are in the app.
Get the appWhat this job usually bills at
$5,000 to $10,000
Customers typically pay this range, from the sources below, so you can sanity check your total.
Sample prices, not a quote. Customers typically pay $1,500 to $15,000 to repipe supply lines, average $7,500, and most PEX jobs on a two-bath house land between $5,000 and $10,000, with a typical house at about $7,500. The $7,500 sample is that two-bath PEX repipe from a basement, with a patch allowance and no full paint. A slab reroute or a copper repipe is outside it.
The cost to repipe house water supply lines is typically between $1,500 and $15,000, with a national average of $7,500.
Accessed 2026-10-12.$3,500 to $20,000, with most homes between $5,000 and $10,000 and a typical 1,500 sq ft, 2-bath house at about $7,500 in PEX.
Accessed 2026-10-12.What the estimate assumes
- This is a supply repipe in PEX, not a sewer replacement and not copper.
- The house is one story with two baths, and the runs are reachable from a basement.
- Drywall patch is an allowance. Paint and flooring repair are not included.
- A plumbing permit and a pressure test are included.
Frequently asked questions.
How do plumbers price a PEX repipe?
Price tubing, manifolds, stops, the permit, crew hours, the test, and a separate allowance for wall patch. Published supply repipes run about $1,500 to $15,000, and a typical two-bath PEX job is about $7,500. This sample matches that figure.
What should a whole-house repipe estimate include?
Every fixture stop, the manifold location, who patches drywall, and whether paint is in or out. This sample patches and does not paint. A water heater swap is not on these lines.
How long does a PEX repipe take?
The sample uses 40 crew hours plus 2 hours to pressure test, for a one-story house with basement access. A slab, a second story, or occupied rooms you cannot open will take longer.
Should drywall be a separate line?
Yes. Customers compare plumbing totals and then get surprised by the patch. This sample keeps a $464 allowance on its own line and says paint is extra.
Are these prices a real quote?
No. The lines are sample prices so you can see the shape of the estimate. In the app, the estimate follows the job you describe, your answer, and your prices.
