Home / AI estimates / GFCI outlets
Write a GFCI outlet estimate with AI
A GFCI outlet estimate lists the devices, the covers, and the labor to swap them, and four outlets in a kitchen and a bath usually come to about $720. VanReceipts writes it from a sentence.
Free to look around. 3 days free on yearly Pro.
Are the boxes already deep enough?
GFCI outlets
SAMPLE PRICES| # | Line | Type | Qty | Rate | Amount | Note |
|---|---|---|---|---|---|---|
| 1 | GFCI receptacles | Material | 4 | $22 | $88 | 20 amp, tamper resistant |
| 2 | Covers | Material | 4 | $4 | $16 | Match the existing plates |
| 3 | Pigtails and connectors | Material | 1 lot | $12 | $12 | Line and load landed clean |
The total and 4 more lines are in the app.
Get the appWhat this job usually bills at
$520 to $800
Customers typically pay this range, from the sources below, so you can sanity check your total.
Sample prices, not a quote. Customers typically pay $130 to $300 for one GFCI outlet, average $210, and another guide lists one GFCI outlet at $120 to $200. The $720 sample is four outlets, so the total is not inside either one-outlet range. Each device in the sample is $180 all-in, which sits in both one-outlet bands, and four of those is $720.
The typical GFCI outlet cost ranges from $130 to $300, with a national average of $210 for this type of outlet installation.
Accessed 2026-10-12.Installing a ground-fault circuit interrupter (GFCI) outlet $120 to $200
Accessed 2026-10-12.What the estimate assumes
- Four existing receptacles, two in a kitchen and two in a bath.
- The boxes are deep enough, so nobody opens the wall.
- No new home run and no panel work.
- Each device is tested before you leave.
Frequently asked questions.
How do electricians price GFCI outlets?
Price the device, the cover, and the time per box, then multiply by the count. Published figures for one outlet run about $130 to $300 and about $120 to $200. This sample is four outlets at $720, or $180 each all-in.
What should a GFCI estimate include?
The count, the rooms, whether the boxes fit, and whether you are protecting downstream outlets from one device. This sample swaps four devices and does not pull new wire.
How long do four GFCI outlets take?
The sample uses 4 hours on the devices plus an hour of travel when the boxes are sound. A shallow box that needs a remodel ring, or a damaged cable, takes longer.
Should one GFCI feed the rest of the circuit?
Sometimes. If the customer wants one device protecting the others, drop the extra GFCIs and say which receptacles are on the load side. This sample prices four separate devices.
Are these prices a real quote?
No. The lines are sample prices so you can see the shape of the estimate. In the app, the estimate follows the job you describe, your answer, and your prices.
