Home / AI estimates / Mini split install
Write a mini split install estimate with AI
A one-zone mini split estimate lists the head and outdoor unit, a short line set, the electrical, a permit, and labor, and it usually comes to about $4,000. VanReceipts writes it from a sentence.
Free to look around. 3 days free on yearly Pro.
Is there a clear outside wall for the line set?
Mini split install
SAMPLE PRICES| # | Line | Type | Qty | Rate | Amount | Note |
|---|---|---|---|---|---|---|
| 1 | 12,000 BTU single-zone heat pump | Material | 1 | $1,895 | $1,895 | One wall head, one outdoor unit |
| 2 | Line set, 15 ft | Material | 1 | $210 | $210 | Run stays under 15 ft |
| 3 | Wall bracket and condenser pad | Material | 1 lot | $120 | $120 | Pad at grade, not a roof bracket |
The total and 6 more lines are in the app.
Get the appWhat this job usually bills at
$2,000 to $6,000
Customers typically pay this range, from the sources below, so you can sanity check your total.
Sample prices, not a quote. Customers typically pay $2,000 to $5,500 for a single-zone mini split fully installed on one guide, and about $3,000 to $6,000 for one zone on another. The $4,000 sample is one 12,000 BTU head, a short line set, a permit, and labor, with space already in the panel. A second head or a service upgrade is outside this page.
The average cost to install a mini split runs $2,000 to $5,500 for a single-zone system, fully installed.
Accessed 2026-10-12.Mini split installation cost runs about $3,000 to $6,000 for one zone in 2026, $6,000 to $11,000 for two zones, and roughly $8,000 to $18,000 or more for a whole-home system with three to five zones.
Accessed 2026-10-12.What the estimate assumes
- One 12,000 BTU wall head for a single bedroom, not a multi-zone system.
- The line set is under 15 feet and the condensate is a gravity drain.
- The outdoor unit sits on a pad at grade.
- The panel has room for a 30 amp breaker, so this is not a service upgrade.
- A mechanical permit is included at a typical city fee.
Frequently asked questions.
How do HVAC techs price a one-zone mini split?
Price the matched pair, the line set, the pad, the electrical, the permit, and startup labor as their own lines. Published one-zone bands run about $2,000 to $5,500 and about $3,000 to $6,000. This sample is $4,000.
What should a mini split estimate include?
The indoor head and outdoor unit, a line set, a pad, condensate, a disconnect and breaker, a line-set cover, the permit, and commissioning. Say the line-set length and whether the panel has space.
How long does a mini split install take?
The sample uses 8 hours to set both ends and commission the system, plus an hour to walk the customer through it. A line set through a finished closet, or a roof bracket, takes longer.
Do I need a new circuit for a mini split?
Yes, a dedicated breaker. The sample includes a disconnect, a whip, and a 30 amp breaker, and it assumes the panel already has space. A full panel change is a different estimate.
Are these prices a real quote?
No. The lines are sample prices so you can see the shape of the estimate. In the app, the estimate follows the job you describe, your answer, and your prices.
